August 2009 Update - Engine Mount Move, Shifter, E-Brake and Steering Column Install

Well, we're back in Fayetteville. Took some time off work to get a bunch of stuff accomplished. First, we welded the dash for more support. After that was accomplished we decided we needed more clearance between the engine and firewall, so we removed the engine and cut out the existing engine and transmission mounts, moving them 1 1/2" forward and rewelded them back in place. Next we decided to tackle the installation of the shifter, emergency brake and brake cables. Finally, we measured and cut the hole for the steering column and installed the steering column. We also did a bit of welding and cleaning up the metal inside the bottom of the cab for better support. Here are some photos for your viewing pleasure. Stayed tuned for the next installment very soon, which will include: steering linkage and gas tank.

\